We are pleased to inform about the new TonCut 7. The new version includes following changes:

• The program has been adapted to monitors with high resolution. It also correctly supports High-DPI mode in Windows 10.
• Error causing the printouts to occupy only a small part of the page has been corrected.
• We have significantly accelerated the algorithm for determining cuts.
• We have corrected the error which could cause occurrence of duplicate of materials, devices and veneers.
• We have corrected the error which could cause program suspension when adding standard sheet dimensions.
• DXF – layer with the description of pieces can be now printed.
• DXF – we added the possibility to change the name of layer with the described pieces.
• We increased the accuracy of statistics (length and surface) up to 3 decimal places.
• We have refreshed the look.

We are pleased to inform about the new TonCut 7. The new version includes following changes:

• New option has been added to determine what size (net or gross) is to be cut out.
• Thickness of a veneer can be zero now.

We are pleased to inform about the new TonCut 7. The new version includes following changes:

• Default margins support has been restored. Now you can set the default margins for each material separately.
• Support for standard sheet sizes has been rebuilt. Now the standard sizes are set for each material separately.
• Tables on the printouts now contain gross dimensions.
• Labels now contain gross dimensions.
• Printouts have been optimized to make the best use of a sheet of paper. Tables can now change their position and width so that the sheet schema is as large as possible.
• Fixed error that could have caused the program to crash when trying to save the results if they were previously filtered.

Old plugins will not work with this version of TonCut. Please upgrade all plugins you use.

We are pleased to inform about the new TonCut 7. The new version includes following changes:

• A configuration wizard has been added. It adjusts the program settings to the needs of the user, industry and computer power. The wizard opens automatically when you start the program for the first time. It can also be opened manually in the optimization profiles window by pressing Restore defaults.
• Optimization acceleration. In some cases, optimization can be up to 50 times faster. In particular, it refers to optimization of 1D materials and 2D when there are many sheets optimized.
• Fixed error that could cause the program to crash on computers with more processor cores.
• Fixed error that resets IDs of added pieces and sheets.

We are pleased to inform about the new TonCut 7. The new version includes following changes:

• CSV import: added option to indicate if the dimensions are gross or net.
• CSV import: if material thickness is available, the list of materials only shows the matching ones.
• CSV Import: fixed error that could cause the program to crash if one of the materials was not assigned.
• CSV Import: fixed error that could cause the program to crash if one of the dimensions was not a correct number.
• The list of pieces shows gross dimensions now.
• The Start button is always active now.
• Fixed error in the piece data window that caused a wrong dimension calculation if the units used were different than millimeters.

We are pleased to inform about the new TonCut 7. The new version includes following changes:

• Option to enter dimensions of a piece as net or gross value.
• Fixed error that allowed creating many devices, materials and veneers with the same name.
• Fixed error that could cause incorrect assignment of the materials to the devices during import (of materials and devices) from the SSI file.

We are pleased to inform about the new TonCut 7. The new version includes following changes:

• Veneers - veneer thickness added.
• Veneers - information on the material thickness has been added.
• Printouts - in order to increase visibility, the veneers are now marked in blue.
• At the first installation, the program configuration is now matched to the speed of the computer.
• Option to restore default search profiles has been added.
• Fixed error that could have caused a wrong calculation of cuts. The consequence of this error was the lack of cut numbers on the printouts. The program could also understate the total number and length of cuts.
• Printouts - fixed error that caused lack of dimensioning of the main cuts if the sheet had margins.

Old plugins will not work with this version of TonCut. Please upgrade all used plugins.

We are pleased to inform about the new TonCut 7. The new version includes following changes:

• Support for 1D materials.
• Completely new result printout:
  • we have corrected the problem with the mirror image of the outline,
  • better use of space depending on whether we print horizontally or vertically,
  • highlighted information about the number of copies of a given sheet.
• Option to change best result criterion.
• Option to change order of printout of labels.
• Limitation of cut length and width as separate device parameters - limitation of a strip width useful when cutting in strips.
• Completely new sheet data window.
• Information about consumption of materials and veneers on the results screen.
• We have arranged the statistics on the printouts and in the program.
• We have removed the results summary printout.
• Option to turn off the surplus in material parameters.
• We have added protection against the loss of entered data.

Old plugins will not work with this version of TonCut. Please upgrade all used plugins.

We are pleased to inform about the new TonCut 7. The new version includes following changes:

• We have improved the formula for assessing solutions so that it takes into account not only the size of waste, but also the recyclable waste and area of the used sheets.
• Label printing - labels are drawn even if they do not fit on the page.
• We have added dimensions of sheet below its preview.

We are pleased to inform about the new TonCut 7. The new version includes following changes:

• Fixed compiler error that could cause the program to crash on computers with more computing power and/or more processor cores.
• Assignment of sheet margins has been fixed. The left/top/right/bottom orientation now refers to the position of the sheet in which the length is horizontal and the width is vertical.
• Margin control on data import from CSV files was added.
• Fixed error that may have caused some dimensions of the main cuts to be missing on the printouts.

NOTE: margins assignment change applies to the Bottero 352-BCC and Schneider Electric NUM 1020 plugins. Please upgrade them to the latest versions.